|
Quick Repairs.
Riverside HVAC Contractor
A talented Riverside HVAC Contractor. We offer high quality!
|
Choosing a contractor who sizes equipment & ductwork based on square footage or existing size, they are treating your house like it’s the same as any other. This is doing a great injustice to your level of comfort & causing you to throw your money away.
Please visit us at:
JBS Mechanical Inc.
328 E Commercial Rd Ste 114
San Bernardino, CA 92408
Never trust a contractor who recommends or accepts to replace your HVAC system without a PERMIT (no matter what). They are breaking the law and exposing you to additional costs & liabilities. Also, there will be no Third-Party inspector to check their work to ensure it even passes code. You’ll just have to take the contractors word for it.
• FACT - Over 80% of existing & newly installed systems are “OVER-SIZED”. (believe it or not, it’s true) This means over 80% of the contractors out there are installing incorrectly. Why is that?
• FACT - It is not possible to calculate the equipment / duct sizes without an approved heat loss/gain evaluation of your home. That’s why! Most contractors do not perform load calculations. They just do what they were always taught to do and size by square footage.
• FACT - The average home leaks 30-40% of the air conditioning / heating into the attic and walls. A contractor who does not test & seal your ductwork is causing you to throw your money out the window.
A True Professional Contractor will do the following:
1. Measure all rooms, windows, & insulation.
2. Perform an ACCA approved energy evaluation on your home.
3. Pull all required city/county permits.
4. Test & Seal ducting to reduce air leakage. (stops you from spending money to cool off your attic)
5. Have a Third-Party HEERS Rater verify the leakage reduction.
6. Have a City Inspector verify all work is done correctly.
If you choose a True Professional Contractor, you will notice a 15-25% increase in performance and a 15-25% reduction in utility bills over the same SEER equipment installed by another contractor.
Add that up over 20 years and see which choice makes the most sense to YOU.
JBS Mechanical, Inc. is a Heating, Ventilation and Air Conditioning company specializing in Residential Construction.
In the past 4 years, we have completed almost 4,000 installations for both new construction and replacement units in existing homes in Southern California.
We offer professional installation of quality products to ensure that your Home Comfort System meets or exceeds all state and local requirements.
Our wide range of services includes Mechanical Design, Manual J and Manual D design.
This advanced program helps us determine exact duct sizing and layout to make your home as comfortable as possible.
We have a multi-point inspection process at both the rough installation and the finish installation of each house.
Customer service is our primary focus.
The president of our company, Joaquin Contreras, started his career almost 25 years ago in HVAC customer service and today he places his focus on a total commitment to excellence of service.
Services Offered:
-
Installing and Replacing Central Air Conditioning
-
Installing and Replacing Central Heating Systems
-
Performing Energy Load Calculations
-
Properly Removing and Replacing Ventilation Ductwork
-
Servicing All Major Brands
How to Find a Dependable Riverside HVAC Contractor
It doesn’t matter what part of the country you’re in, staying warm during the winter and cool during the summer is imperative. An HVAC contractor is an important part of your seasonal indoor comfort. An HVAC or heating, ventilating, and air conditioning contractor takes care of installing and maintaining the climate control equipment in your home or business. Choosing the right Riverside HVAC contractor to install a new system or inspect or upgrade an existing one can be as important to the systems operation as purchasing the right equipment.
Choosing a reliable Riverside HVAC contractor should be a simple process. Yet the simple fact is that a lot of people don’t have any idea what they should be looking for when they need to find a knowledgeable HVAC contractor. Whether you need repairs or a new heating or air conditioning system installed, its important to find an HVAC contractor you can trust to provide quality work and reliable service.
Why You Need the Best Riverside HVAC Contractor
Before you can have a new system installed or work done on your older system, a Riverside HVAC contractor will need to do a physical inspection of the location or installed equipment. If an HVAC contractor tries to give you a quote without an initial visit to inspect the job or diagnose a problem, it’s best not to do business with him. You might find that such a contractor is only interested in the profits and not in quality service.
The HVAC contractor will need to calculate the heat-load of your home or business by use of a checklist and determining the square footage. The HVAC contractor can then write up an estimate for a new system or parts for an existing one as well as labor charges. If you plan on having new equipment installed, most Riverside HVAC contractors will usually have more than one option when it comes to available systems. Financing may be available with your HVAC system as well as an extended warranty.
If you’ve been having problems with your existing heating and cooling system a Riverside HVAC contractor should ask for details and following a thorough examination should then provide you with viable solutions. Often it’s a matter of an existing unit not properly sized for the structure and a qualified Riverside HVAC contractor can recommend new or additional equipment that will meet your home or business needs. In the long run this can prove to be less expensive and more energy efficient.
What to Expect from a Riverside HVAC Contractor
Don’t be afraid to ask any Riverside HVAC contractor for references. You can also ask friends, family and co-workers if they have had any experience with an HVAC contractor. They might be able to offer you some good leads. The Better Business Bureau is always a good place to check a contractor’s history. They can tell you if a company or individual has any complaints on file and if they were taken care of to the customer’s satisfaction. Some Riverside HVAC companies are quite large and deal with hundreds of people a year so a complaint or two is common, even with highly reputable companies. If any HVAC contractor has an ongoing record of complaints you know there is most likely a problem.
Make certain that any contractor you are considering is licensed, insured and bonded. A Riverside HVAC contractor is required to take specific tests to ensure they have the necessary skills before they can receive a license. It’s important that any contractor have workers compensation as well as be bonded to protect your property from possible damage.
Before you hire any Riverside HVAC contractor make certain his business address and phone number are listed in the phone book. Having a physical business address is probably a reliable indicator of an established business. Reputable companies should readily provide any necessary contact information. If the contractor doesn’t have a physical business address or adequate contact information you have no way of being sure they will be around should you need to have under warranty repairs done on the equipment.
Ask the Riverside HVAC contractor what type of test equipment he uses to check for dangerous levels of carbon monoxide and make sure your home or business is safe. When working with cooling equipment, how does the contractor dispose of potentially environmentally hazardous refrigerants? A qualified HVAC contractor will have an EPA (Environmental Protection Agency) license to handle refrigerants.
Safeguard Your Investment with a Knowledgeable Riverside HVAC Contractor
You don’t need to accept the first bid that you receive. Get several quotes from different HVAC contractors and take your time to compare them. If you feel unsure about a specific company or contractor, keep looking for one that you feel is right for the job. It’s easy to be tempted by the lowest bid but it’s not always the best choice. Have the contractor go over the estimate and show you how he is able to save you so much money. Don’t cut corners when it comes to equipment and installation, yet look for the bid that will give you the best deal for your money.
You’ll want to choose a qualified Riverside HVAC contractor to install, upgrade or repair your heating, ventilation and air conditioning system. A qualified contractor will behave in a professional manner. The contractor should arrive on time or call if they’re dealing with an emergency. Their vehicles and offices will reflect the quality of the business they run.
Remember that you don’t want the cheapest bid. You need to look for the most reasonable offer that includes the best system and service for your money. Your home or business’s heating and cooling system is a big investment and you need to make sure that any Riverside HVAC contractor you decide to work with will be there to back up that investment.